Atop-technology SE5001A User manual Uživatelský manuál stáhnout pdf (Strana 6)

User Manual Version 1.0

SE5001A Serial Device Server

1 Introduction

The SE5001A Ethernet Serial device server acts as a gateway between Ethernet (TCP/UDP) and

RS-232/RS-422/RS-485 communications. The information transmitted by SE5001A

is transparent to both host

computers (Ethernet) and serial devices (RS-232/RS-422/RS-485). Data coming from the Ethernet is sent to the

designated RS-232/RS-422/RS-485 port and data received from RS-232/RS-422/RS-485 port is sent to the

Ethernet transparently allowing bidirectional communication.

In the computer-aided manufacturing or industrial automation areas, SE5001A is used by field devices to directly

connect to an Ethernet network. The user can then use a network application or use Virtual COM software to

simulate a virtual com port in the PC to fetch serial data from SE5001A remotely over Ethernet.

With SE5001A, it is possible to communicate with a remote serial device in the LAN or even in the Internet, which

dramatically increases reach in distance and scalability.

1.1 SE5001A Series Comparison

Model Name

Power Interface

Serial Interface

Firmware

SE5001A

TB3

DB9

Serial Device Server

SE5001A-TB

TB3

TB5

Serial Device Server

Note: The Adapter’s DC connector has the following dimensions:

5.5mm inner radius, 2.1mm outer radius, and 9.5mm length

1 2 3 4 5 6 7 8 9 10 11 ... 71 72

Žádné komentáře

Atop-technology SE5001A User manual Uživatelský manuál Strana 6