Atop-technology SE5001A User manual Uživatelský manuál stáhnout pdf (Strana 21)

User Manual Version 1.0

SE5001A Serial Device Server

3.2.5. Configure SE5001A as TCP server

Figure 3.7 Link Mode: TCP Server Setup

 Type 1 (Link Mode) from “Input choice and enter (1~4):” of COM1

 Type 1 (TCP Server) in the “Input choice(1~5) and enter：”

 Input local port in the “Please input local port：”

To Enable IP filter：

 Input y in the “Do one want to enable IP filter(y/n)?” to enable IP Filter. Otherwise input n.

 Input source IP in the “Please input Filter_IP ：”

 Double click “Enter” key

 Input idle time in “Please input idle time to send TCP alive packet(x*10sec)：”(ex. Input 2 to change the

sending TCP keep alive packet period to 20 sec)

Note:

1. IP filtering function is disabled if setting FILTER_IP to “0.0.0.0”.

2. IP filter is disabled by default

3. If IP filter is enabled, only source IP assigned can connect to SE5001A’s COM.

4. If the multi-connection firmware is installed, SE5001A will prompt for “Multi_Port”, meaning multiple

connection

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

Žádné komentáře

Atop-technology SE5001A User manual Uživatelský manuál Strana 21